• New Name

    I've renamed this blog to Grid Bugs to better reflect the true nature of roguelike development.

  • Even Separation Algorithm

    This post describes an algorithm for evenly spreading out a sequence of items made up of two distinct types of item. I came up with it when attempting to draw straight lines on a grid, where lines are represented by discrete steps in one of two directions. In order for such a line to appear straight, the steps in one direction should be spread out as much as possible with respect to the steps in the other direction. The solution generalizes to spreading out any sequence made up of two distinct types of item that are repeated a number of times.


    Straight line from @ to Z, made up of steps to the east and northeast

    Straight Lines

    In a 2D grid, a straight line is made up of steps in at most two directions. One of these is always a cardinal direction (north, east, south, west) and the other is an ordinal direction (northeast, southeast, southwest, northeast). It's simple to determine the number of each steps required to get between two points. Suppose you take steps in the ordinal direction until you are in line with the destination in the cardinal direction, then move in the cardinal direction until you reach the destination.


    Splitting the line into its cardinal and ordinal components

    To make the line appear straight, we have to spread out the cardinal and ordinal steps "as much as possible". Being "as spread out as possible" turns out to be a non-trivial property to quantify. Assuming there are more ordinal steps than cardinal steps, there's no reason to ever have two or more cardinal steps in a row. Thus the sequence of steps becomes groups of one or more ordinal steps, separated by individual cardinal steps. Also, we want the groups of ordinal steps to all be similar in size.


    First attempt at a straight line

    The sequence of steps in the image above is: ⇗⇒⇗⇒⇗⇗. A close look reveals a slightly longer diagonal section at the Z end of the line. So what's missing from the definition of "as spread out as possible"? How can we make this line more straight? This sequence can be thought of as groups of separated by . The sizes of these groups in the order they appear is: 1 1 2. What if we apply the same separation property to this sequence? There are more 1s than 2s, so no two 1s should be adjacent. Groups of 1s should be separated by individual 2s. Thus the sequence becomes: 1 2 1.


    Cardinal and ordinal steps are now as spread out as possible

    The sequence of steps has become: ⇗⇒⇗⇗⇒⇗. Representing it as group sizes, it is: 1 2 1. This sequence of sizes can similarly be thought of as groups of 1s separated by 2s. The sequence of sizes of these groups is: 1 1. Now that we have a homogeneous list, there's no further spreading necessary, and thus our sequence is as spread out as possible, and our line is as straight as possible.

    As spread out as possible

    Let's quantify the property that makes a sequence "as spread out as possible". As you probably inferred from the above example, this property is recursive.

    The first base case: A sequence is as spread out as possible if all its elements are homogeneous. E.g. AAAAAAAA

    The second base case: A sequence is as spread out as possible if it is made up of an equal number of two distinct types of element, and the sequence alternates between elements one at a time. E.g. ABABABAB

    The recursive case: A sequence is as spread out as possible if elements of its most-frequent type are arranged into groups separated by individual elements of its less-frequent type, such that:

    • there are at most two different sizes of group
    • if there are two different group sizes, the larger size is 1 greater than the smaller size
    • the sequence of group sizes in the order they appear is as spread out as possible

    Separation Algorithm

    This algorithm takes as input a pair of elements a and b, and non-negative integers na and nb, and returns a sequence containing na copies of a, and nb copies of b, that is as spread out as possible. The core idea is to figure out the group sizes and how many groups of each size will be present in the output, then recur with the group sizes and number of each group size as arguments. The result will be a sequence of group sizes that is as spread out as possible, that can then be used to construct a spread out list of elements.

    function spread(a, b, na, nb) {
        // allows us to assume na >= nb
        if (na < nb) {
            return spread(b, a, nb, na);
        // first base case - no need for na == 0 case, as na >= nb
        if (nb == 0) {
            return [a, a, a, a, ...];
        // second base case
        if (na == nb) {
            return [a, b, a, b, ...];
        /* Because of the second base case, at this point we know
         * that na > nb. Thus, the result will be groups of "a",
         * separated by individual "b".
         * E.g. aaa b aaaa b aaa b aaaa b aaa
        // sequence starts and ends with a group of "a"
        let numGroups = nb + 1;
        // there may be up to two group sizes
        let smallGroupSize = floor(na / numGroups);
        let largeGroupSize = smallGroupSize + 1;
        /* To determine the number of small and large groups:
         *      numGroups == numSmallGroups + numLargeGroups
         *      na == numSmallGroups * smallGroupSize +
         *            numLargeGroups * largeGroupSize
         *         == numSmallGroups * smallGroupSize +
         *            numLargeGroups * (smallGroupSize + 1)
         *         == numSmallGroups * smallGroupSize +
         *            numLargeGroups * smallGroupSize +
         *            numLargeGroups
         *         == smallGroupSize * (numSmallGroups +
         *                              numLargeGroups) +
         *            numLargeGroups
         *         == smallGroupSize * numGroups +
         *            numLargeGroups
         *      numLargeGroups == na - numGroups * smallGroupSize
         let numLargeGroups = na - numGroups * smallGroupSize;
         let numSmallGroups = numGroups - numLargeGroups;
         /* In the "aaa b aaaa b aaa b aaaa b aaa" example:
          * na == 17
          * nb == 4
          * numGroups == 5
          * smallGroupSize == 3
          * largeGroupSize == 4
          * numSmallGroups == 3
          * numLargeGroups == 2
        // recur on group sizes
        let groupSizes = spread(smallGroupSize, largeGroupSize,
                                numSmallGroups, numLargeGroups);
        // total number of elements in result sequence
        let nTotal = na + nb;
        // create array to hold result
        let sequence = new Array(nTotal);
        // will be used as index into sequence
        let index = 0;
        // construct sequence from group sizes
        for (let size of groupSizes) {
            // insert the current group
            for (let i = 0; i < size; ++i) {
                sequence[index] = a;
            // instert the individual separator
            if (index < nTotal) {
                sequence[index] = b;
        return sequence;


    Let's work out the worst case execution time in terms of the value of n == na + nb (ie. the total length of the requested sequence).

    If we ignore the recursion for a second (pretend any recursive calls are instant), this algorithm includes a single loop, which iterates exactly n times as it builds up the result sequence. Thus the complexity of the algorithm ignoring recursive calls is linear.

    When we recur, the length of the requested sequence is numSmallGroups + numLargeGroups == numGroups == nb + 1. Recall that in the non-trivial case, nb is strictly less than na. Thus, nb + 1 is at most n / 2.

    So the cost of the first recursive call (ignoring any further recursions) is n / 2. If this call makes further recursions, each will again cost at most half of the callers value of n. Thus, the total complexity can be expressed as O(n + n/2 + n/4 + n/8 + ...) == O(n * (1 + 1/2 + 1/4 + 1/8 + ...)) == O(n * 2) == O(n).

  • Skeleton Crew

    I wrote this game for the 2016 7 Day Roguelike challenge.

    Fight a variety of undead enemies with a variety of weapons on a procedurally generated spaceship. Damaging the hull of the ship causes sections of the ship to be depressurized, and their contents sucked into space, including you!

    Play in browser:

    Dowload (bundled with node webkit):

    Source code


  • 7 Day Roguelike 2016: Success

    It's now Friday night (technically Saturday morning). Tomorrow morning it will have been 1 week since I started work on "Skeleton Crew". This is the final entry in my development log.

    Tonight was mostly polishing. I added support for arrow keys and the numpad as an alternative to vi keys, lots of playtesting and tweaked a few parameters here and there to make the game more balanced.

    I also added a rocket launcher.

    Aiming. This also happens to show another rocket launcher lying on the ground.


    Explosion! This shows the shock wave beginning to move outwards. The nearest zombies have already been pushed back by the explosion.